OPEN SOURCE SNMP TRAP RECEIVER SOFTWARE

в””в”Ђ5460 /usr/sbin/grafana-server -config=/etc/grafana/grafana.ini -pidfile=/var/run/grafana/grafana-server.pid -packaging=deb cfg:=/var/log/grafana cfg:default.paths. Loaded: loaded (/usr/lib/systemd/system/rvice enabled vendor preset: enabled)ДЄctive: active (running) since Tue 02:34:26 UTC 27min agoД¬Group: /system.slice/rvice Being able to take one incoming trap and route it to multiple destinations would be very useful.Copy to Clipboard This should work with excellent efficiency for basic trap routing, but it leaves us completely limited to what we can mach and filter on with IPTables, so we're concerned about flexibility for the future.ДЄnother feature that we'd really like, but isn't quite a 'must have' is the ability to duplicate or mirror the UDP packets.

For example: # Range: 10.0.0.0/19 Site: abc01 Destination: foo01

We've currently implemented and are testing the last solution, with a Linux box with IPTables configured to receive the traps, and then depending on the source address of the trap, rewrite it with a destination nat (DNAT) so the packet gets sent to the proper server.

Using IPTables on a Linux box to route the.

Using a Load Balancing Appliance (F5, etc).

(having some difficulty finding many load

OPEN SOURCE SNMP TRAP RECEIVER SOFTWARE

Using some sort of load balancing software.

Any suggestions for the best way to handle this? One key feature that we need is the ability to forward the traps to a specific box depending on the source address of the trap. This will allow us to have multiple back-end boxes handling traps, and to distribute load among those back end boxes. We'd like to have all devices on our network send SNMP traps to a single box (technically this will probably be an HA pair of boxes) and then have that box pass the SNMP traps on to the real processing boxes. I'm implementing a network monitoring solution for a very large network (approximately 5000 network devices).

Open source snmp trap receiver